IT:
The printer test begins when you enter in the function.
You stop it by pressing SETUP.
SUB-MATRIX PARAMETER CLASSIFICATION
PRINTER
PR ALL CONF
DEFINITION:
The recorder allows you to print its complete configuration data.
Refer to section 4.5 "PRINT CONFIGURATION".
NOTE:
ADVICE: We recommend you to execute a PRINT ALL CONF after having
received your recorder.
During the printing, a message (IN PROGRESS) is shown on the lower
display, indicating the current action.
You can stop the printing at any time by pressing the SETUP or
DISPLAY keys. All other keys are deactivated.
The data is printed in reverse order so that you can read it in a logical
order from top to bottom when completed.
PRINT ALL CONF does not print the MATH sub-matrix if your recorder
does not have this option.
To Next Page
Loading...
