8-14
8. SERVICE
SUB-MATRIX PARAMETER CLASSIFICATION
PRINTER
PR HRD CONF
DEFINITION:
This function allows you to print the hardware configuration of your recorder
and shows the type of current cards with their respective slots.
NOTE:
During the printing, the "IN PROGRESS" message is displayed.
At the end of the printing, the initial message (PR01 PR HRD CONF) is
displayed again.
PRINTING FORMAT:
D: 6 digital inputs
R: 6 alarm relay outputs (digital outputs)
L: 4 linear inputs (analog inputs)
U: 4 universal inputs (analog inputs)
C: 4 current outputs
?: incorrectly located card
•: no existing card
NOTE:
In this case, data is printed on BLANK paper. (Trace printing is momentarily
stopped.)
The card abbreviations must be the same as those in the Model Selection
Guide and in the "CARD USED" function ("MISCELLANEOUS" service).
To Next Page
Loading...
