Honeywell E-Mon Class 3200

E-MON CLASS 3200 METER
62-0397—02 36
10.2 Normal Mode Display Screens
The E-Mon Class 3200 meter features seven Normal Mode Display Screens for
monitoring the meter. Each screen is displayed for 5 second intervals, before
scrolling onto the next screen. You can “lock” the scrolling display on any one of
the seven screens. This will be explained in detail on following pages.
Explanations of the Normal Mode Display Screens are as follows:
Fig. 26. E-Mon Class 3200 Meter Display Screens.
Screen 1: Total Kilowatt-Hours (kWh)
Delivered.
Screen 2: Peak Demand (kW)
with Date & Time Stamp
Screen 3: Actual Load (kW)
with Present Time
Screen 4: Average Current (amps)
Per Phase.
Note: Single Phase option will only
state:
PH-A and PH-B.
Screen 5: Average Voltage (volts)
Per Phase.
Note: Single Phase option will only
state:
PH-A and PH-B.
Screen 6: Average Voltage (volts)
Phase to Phase.
Note: Single Phase option will only
state:
P-AB and P-BA.
Screen 7: Power Factor (pf)
Per Phase.
Note: Single Phase option will only
62-0397_C.fm Page 36 Wednesday, May 9, 2018 9:28 AM