ECS Device Installation 151455
4-21
4.4.7 Connecting AC Power
The AC inputs are rated as 120 VAC, 60 Hz (transformer P/N 115061).
To install the AC transformer into the ECS-50W cabinet follow these steps:
1. Open the cabinet door.
2. To access cabinet interior, open dead-front panel by removing the upper screw and the mid-door
retaining screw.
3. Mount the transformer onto the threaded cabinet transformer mounting studs using the supplied
locking hex nuts as shown in Figure 4-30.
Figure 4-30 Transformer Mounting
To Next Page
Loading...
