Checking RF communication4.6.2
The evotouch controller sends test signals to the assigned
HM80 in order to test the signal strength.
When HM80 receives the test signal, the eld strength is
indicated by ashing of the red LED (4).
1 pulse = sufficient
5 pulses = strong
Note
Sensor information relates to the sensor in the zone
controlled by the HM80.
Deactivating the RF communication check
Press the NEXT button. f
Completing conguration
In the following screen press the DONE button. f
Configuration of the HM80 mixing valve is completed.
To Next Page
Loading...
