Honeywell Evohome

42 evotouch
Binding the evotouch controller to the HCW82 room adjuster/sensor or to 4.9
the HCF82 room sensor
Binding procedure4.9.1
Follow the guided or expert conguration until the f
following screen appears.
Position the f evotouch controller as close as possible
to the HCW82 / HCF82.
Press and hold the bind button (1) on the HCF82 / f
HCW82 for approx. 1 second.
Binding takes place automatically.
i Binding is terminated automatically after 5 minutes.
1
2