EasyManua.ls Logo

Honeywell INNCOM e7w

Honeywell INNCOM e7w
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
U.S. Registered Trademark
Copyright © 2020 Honeywell Inc. All Rights Reserved
31-00302-01
INNCOM e7w Thermostat
USER GUIDE
Jan-2020

Table of Contents

Other manuals for Honeywell INNCOM e7w

Question and Answer IconNeed help?

Do you have a question about the Honeywell INNCOM e7w and is the answer not in the manual?

Honeywell INNCOM e7w Specifications

General IconGeneral
DisplayLCD Touch Screen
ConnectivityWired
Power Supply24V AC
Temperature Range40°F to 95°F (4.5°C to 35°C)
Humidity ControlYes
MountingWall Mount
Operating Temperature32°F to 122°F (0°C to 50°C)
TypeThermostat
Operating Humidity5% to 90% RH (non-condensing)

Summary

Important Safety Information and Installation Precautions

Read all instructions

Follow all installation and operation guidelines carefully.

High voltage safety test

Assume hazardous voltages exist; perform safety checks before work.

Lightning and high-voltage danger

Avoid electrical storms; protect outdoor wiring from lightning surges.

Wiring and equipment separations

Maintain safe distances between power and communication wiring and other systems.

Security Requirements

System Environmental Considerations

Discusses firewall requirements and protecting the system from cyber-attacks.

Deployments and Maintenance Considerations

Provides guidelines for secure server updates, password management, and physical security.

Network Communication Notice

e7 w Thermostat Wiring

Wiring X47.L.P (24 VAC) with e7 w Thermostat

Wiring diagram and connection details for 24VAC HVAC controller.

Wiring X47.H.P (120 VAC) with e7 w Thermostat

Installation

Required Installation Hardware

Lists all physical components needed for installation.

Required Commissioning Tools

Lists specific tools for advanced setup and configuration.

Mounting Location

Procedure to setup e7 w

Initial Setup

Setup PAn ID

Setup RF Channel

Service Mode

Verifying HVAC Partner Address (PA)

Binding S541.RF Door, Window or Balcony Switches

Service Mode Functions

RID - Setting e7 w Room ID (rld)

PAN - Setting e7 w PAn ID (PAn)

RF - Setting e7 w RF Channel (rF)

ADR - Teaching A Device Address (Adr)

Forward Binding

IO - Teaching A Device IO Map (lo)

REG - CBL32 Registry Edit (rEG)

PNG - Verifying Device Communication (PnG)

RST - Resetting e7 w (rSt)

BND - Binding Auxiliary Devices (bnd)

SER - Service Parameter (Ser)

PI5 - Process Image Viewer Parameter (Pi5)

E7 W - e7 w Address Parameter (E7 W)

Binding and Testing RF Locks Using e7 w

Timelox RF Locks

Salto RF Locks

Firmware Upgrade

Related product manuals