Honeywell INNCOM e7w User Manual

INNCOM e7w THERMOSTAT USER GUIDE
55
31-00302-01
BAU – e7w Battery Level (bAu)
Use bAu mode to view the battery level of the 4 AA batteries installed in the e7w. The value is reported
as a 0-255 value, which is scaled to the 0-6.4 VDC of 4 batteries, each with 1.6-volt AA battery.
NOTE
A battery level of 4 volts or less will cause the e7w to display a low battery symbol on its display in-
dicating that the 4 AA batteries need replacement. This condition will also result in a low battery
alarm in the INNcontrol software. Refer below image
1. Enter SERVICE MODE
2. Press UP/DOWN arrow buttons to select bAu.
3. Press MODE button. This action displays bAu value, ranging from 0-255.
bAu
Voltage (VDC)
255
6.4
239
6.0
199
5.0
159
4.0
119
3.0
Table 1: Voltage table
4. Press the FC button to return SERVICE MODE or press UP arrow button to display next
mode
Or
Press the FC button twice to exit SERVICE MODE

Honeywell INNCOM e7w Specifications

General

Brand	Honeywell
Model	INNCOM e7w
Category	Thermostat
Language	English