REG – CBL32 Registry Edit (rEG)
Use the rEG mode to view or edit CBL32 Registry Group 9 Thermo/HVAC and Registry Group 7:X:Y
Input/output in the HVAC Partner device (i.e. X47) to the e7w.
1. Enter SERVICE MODE
2. Use the UP/DOWN arrow buttons to select rEG
3. Press MODE. This action displays Gr value.
4. Use the UP/DOWN arrow buttons to change the Gr value to the required CBL32 Group.
For example, Group 9 for Thermostat 9: X registries, or Group 7 for 7: X Input/Output reg-
istry’s
5. Press the MODE button to continue. This action displays the KEY value (This is the Regis-
try Key value).
6. Use the UP/DOWN arrow buttons to change the KEY value to the required CBL32 Key.
For example, 9:1 - Group 9: Key 1 Occupancy or 7:3 - Group 7: Key 3 Light Output
7. Press the MODE button to continue.
To Next Page
Loading...
