Honeywell INNCOM e7w User Manual

INNCOM e7w THERMOSTAT USER GUIDE
45
31-00302-01
If no replies are received for the read commands, the display will continue to show the P5
address to be pinged and Value.
6. Press the FC button to stop the Ping.
7. Press the FC twice button to return SERVICE MODE or press UP arrow button to dis-
play next mode.
Or
Press the FC button twice to exit SERVICE MODE.
RH – Measuring Room Humidity (rH)
rH parameter is used to read and display measured room humidity via the e7w built-in humidity sen-
sor.
1. Enter SERVICE MODE
2. Press UP/DOWN arrow buttons to select rH.
3. Press MODE button. This action display rH value (Relative Humidity percentage).
For example, 31% rH is displayed humidity percentage.
4. Press the FC button to return SERVICE MODE or press UP arrow button to display
next mode.
Or
Press the FC button twice to exit SERVICE MODE

Honeywell INNCOM e7w Specifications

General

Brand	Honeywell
Model	INNCOM e7w
Category	Thermostat
Language	English