Honeywell INNCOM e7w User Manual

INNCOM e7w THERMOSTAT USER GUIDE
59
31-00302-01
3. Press MODE button. This action displays PA value (14 displayed as default PA value).
4. Use the UP/DOWN arrow buttons to change the PA value.
5. Press the FAN button to store the value. The e7w play beep sound.
6. Press the FC button to return SERVICE MODE or press UP arrow button to display next
mode
Or
Press the FC button twice to exit SERVICE MODE
PI5 – Process Image Viewer Parameter (Pi5)
Use Pi5 mode to read any Process Image (PI) offset value 0-31 from the HVAC partner device. The Pi5
Process Image viewer is an advanced feature intended to be used by an INNCOM technician for ad-
vanced troubleshooting.
1. Enter SERVICE MODE
2. Press UP/DOWN arrow buttons to select Pi5.
3. Press MODE button. This action displays Pi5 value of 0.

Honeywell INNCOM e7w Specifications

General

Brand	Honeywell
Model	INNCOM e7w
Category	Thermostat
Language	English