Honeywell Evohome

Application Manual 45
Checking RF communication4.10.2
HB85 sends test signals to the evotouch controller in order
to test the signal strength.
Press the bind button of the HB85 briey. f
For approx. 10 minutes, HB85 transmits a test message
to the evotouch controller every 5 seconds.
The field strength is indicated on the evotouch
controller.
i
The signal strength can be EXCELLENT, GOOD,
POOR or not received
Completing conguration
Press the DONE button. f
Configuration of the HB85 temperature sensor is completed.