Network Graphic Annunciator (NGA) Operations Guide P/N 9020-0675:B1 03/21/13 35
Section 10: View Screen
The View screen allows the user to view configuration information for any ILI-E3 or ILI95-E3
Series node that is present in the system. The following tabs appear on the View screen:
The types of information that may be viewed include the following settings:
• Global Settings
• Input/Output Devices
10.1 View Screen (Node Tab)
When the View screen first appears, the Node tab is active. Use the Node tab to select the node
from which to view information.
Figure 10.1.1 illustrates the screen that appears when the Node tab
is active from the View screen.
Figure 10.1.1 View Screen (Node Tab)
10.2 View Screen (Node Tab) Options
Table 10.2.1 describes the controls that appear on the View, Node tab screen.
• Node • Devices • Global
View Screen
(Note Tab) Options
Description
Node Tab Tap the Node tab to display a Numeric Entry Keypad screen that
allows direct entry of the desired node number.
UP / DOWN Use the up and down arrows to scroll through the list of available
nodes.
X Press the "X" button in the upper right corner to close this screen.
Table 10.2.1 View Screen (Node Tab) Controls
To Next Page
Loading...
