H-SERIES GREEN CLASS NET METER
13 62-0424-02
5.0 PRECAUTIONARY AND SAFETY
INFORMATION
Internal circuit card components are extremely sensitive to electrostatic
discharge. Be careful not to touch internal circuitry prior to discharging any
static buildup on your person. To discharge yourself, touch a grounded metal
object such as conduit or an earth-grounded metal enclosure.
High voltages present on main PCB terminal block TB1 screw terminals. Risk
of serious injury and/or electrical shock exists. Prior to performing any wiring
operations, review all contents of the user manual and de-energize the MAINS
power switch. Only qualified personnel should perform installation wiring.
Installation wiring must comply with all local and national electrical codes.
Failure to ground the enclosure creates a possible shock hazard. Do not
operate the Green Class Net meter without a protective earth wire attached
securely to the PE terminal screw. After installing protective earth wiring,
secure the screw tightly (7in-lb torque.)
NEVER open front panel of unit while unit has MAINS power applied. Failure to
comply can increase the risk of serious injury and/or electrical shock.
To Next Page
Loading...
Need help?
General
