2
Honeywell 30 Series IP Cameras User Guide
1 INTRODUCTION
This chapter contains the following sections:
• Overview, page 2
• Key Features, page 2
Overview
Honeywell 30 Series IP cameras integrate traditional cameras and network video
technology, combining video data collection and transmission. These flexible, fully
featured cameras are the ideal choice for a wide range of indoor and outdoor
surveillance applications.
Plug-and-play compatible with Honeywell 30 Series Network Video Recorder, the
cameras offer 2 or 5 megapixel resolution at up to 30 frames per second and use video
compression technology to save bandwidth and storage while ensuring maximum video
quality. All the cameras are True Day/Night with intelligent IR capability, providing up to
165 ft (50 m) of illumination in low-light and nighttime scenes. Also, all the cameras
support WDR function at up to 120 dB.
Each camera comes with configurable motion detection and camera tamper detection
and supports up to 5 user-defined privacy mask areas. In addition to a 12 VDC adapter,
all the cameras support Power over Ethernet (PoE), eliminating the need for a separate
power supply and associated wiring. All models also support local video storage on
microSDHC cards (up to 256 GB) when network service is interrupted.
Key Features
Key features of the Honeywell 30 Series IP cameras include the following:
Camera
• Day/Night mode auto-switch
• Video parameter setup, such as electronic shutter and gain
• Motion detection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
