EasyManuals Logo

Honeywell HC30WF5R1 User Manual

Honeywell HC30WF5R1
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
25
Honeywell 30 Series IP Cameras User Guide
Note:
The Audio Settings function applies to HC30WF5R1/HC30W25R3-
12V/HC30W25R3 cameras.
The Focus function applies to HC30W45R2/HC30WB5R2/HC30WE5R2 cameras.
The Pixelcount function applies to the HC30WF5R1 camera. See
Pixel Calculator
Video Settings
Video Title: Enter a name that will be displayed on the title bar of the live video.
Show timestamp and video title in video and snapshots: Check to display timestamp
and video title in live video and snapshots.
Location of time stamp and video title on image: Select a position from the drop-down
list to display timestamp and video title on the top or at the bottom of the video stream.
Time stamp and video title font-size: Select a font size for the timestamp and title.
Camera font (.ttf): You can select a True Type font file for the display of textual
messages on video.
Mount type (Fisheye Model Only): The camera provides 3 Mount types - Ceiling, Wall,
and Floor.
Ceiling: The Ceiling mount type automatically delivers upside-down images. The
Ceiling mode supports the following Display modes - 1O, 1P, 1R, 2P, 1O3R, 4R, 4R
PRO, and 1O8R.
Wall: The Wall mount type applies to the monitoring of long, side-to-side
surveillance areas, such as when mounted on a wall facing a corridor. Different
Mount types have different options with the Display mode settings. For example, the
1P2R (1 Panoramic & 2 Regional) and 1P3R (1 Panoramic & 3 Regional) display
modes are only available when the “Wall” Mount type is applied.
Floor: The Display modes with the Floor mount type are identical to those for the
Ceiling mount except that the images are not vertically flipped.
Color: Select to display color or black/white video streams.
Video Standard: Select the video standard: NTSC or PAL.
Note:
If the video standard is changed, you must disconnect and reconnect the power
Video orientation:
Flip: vertically reflect the display of the live video;
Mirror: horizontally reflect the display of the live video.

Table of Contents

Other manuals for Honeywell HC30WF5R1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC30WF5R1 and is the answer not in the manual?

Honeywell HC30WF5R1 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
IK codeIK10
Form factorSpherical
Mounting typeCeiling
Product colorBlack, White
International Protection (IP) codeIP66
White balanceAuto, Manual
Camera shutter speed1/5 - 1/32000 s
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.7 \
Number of effective pixels (H x V)2560 x 1920 pixels
Number of lenses-
Night vision distance20 m
Total megapixels- MP
Maximum resolution1920 x 1920 pixels
Video formats supportedH.264, H.265, M-JPEG
Thermal frame rate (NTSC)30 Hz
Supported graphics resolutions1536 x 1536, 1920 x 1920
Ethernet interface typeFast Ethernet
Supported network protocolsIPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, DHCP, NTP, DNS, DDNS, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, TLS
Compatible memory cardsMicroSD (TransFlash), SDHC, SDXC
Maximum memory card size256 GB
Ethernet LAN (RJ-45) ports1
DC output voltage12
Power source typeDC, PoE
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Height59.7 mm
Weight820 g
Diameter159.95 mm
Package weight1500 g

Related product manuals