58
Honeywell 30 Series IP Cameras User Guide
Figure 67 People Detection
To enable people detection:
1. Click NEW to add a new people detection window.
2. In the Window Name text box, enter a name for the people detection window. To delete
a window, click on the right of the window name.
3. Draw a detection area by clicking four corner points on the target area. You can
change the shape of the detection area by dragging the corner points.
4. Click SAVE to enable the settings.
5. Check Enable motion detection to enable this function.
Note:
Only one kind of motion detection (motion detection, intrusion detection or people
detection) can be enabled at a time.
Configuring Tampering Detection Settings
Go to Setup Video Analytics Tampering Detection.
This section explains how to configure camera tamper detection settings. With tamper
detection, the camera can detect incidents such as redirection, blocking or defocusing,
or even spray paint.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
