EasyManuals Logo

Honeywell HC30WF5R1 User Manual

Honeywell HC30WF5R1
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
ii
Cautions and Warnings
Warning:
Installation and servicing should be performed only by qualified
and experienced technicians to conform to all local codes and to
maintain your warranty.
Warning:
To ensure compliance with electrical safety standards this product
is intended for use with a Listed Power Adapter marked with
“Limited Power Source”, “LPS”, on the unit, output rated 12 V DC,
minimum 0.7A, Tma=60°C or from Power over Ethernet (PoE)
provided by Listed Information Technology Equipment meeting the
IEEE 802.3af PoE standard.
The Ethernet connection is not intended to be connected to exposed
(outside plant) networks. Do not connect two power sources to the camera
at the same time
List of Symbols
The following is a list of symbols that may appear on the camera:
Symbol Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to discard this product, it
must be sent to separate collection facilities for recovery and recycling. By
separating this product from other household-type waste, the volume of waste
sent to incinerators or landfills will be reduced, and thus natural resources will be
conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is listed by UL (formerly
Underwriters Laboratories).
The FCC compliance logo.
This logo indicates that the product conforms to Federal Communications
Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the product is direct current.

Table of Contents

Other manuals for Honeywell HC30WF5R1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC30WF5R1 and is the answer not in the manual?

Honeywell HC30WF5R1 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
IK codeIK10
Form factorSpherical
Mounting typeCeiling
Product colorBlack, White
International Protection (IP) codeIP66
White balanceAuto, Manual
Camera shutter speed1/5 - 1/32000 s
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.7 \
Number of effective pixels (H x V)2560 x 1920 pixels
Number of lenses-
Night vision distance20 m
Total megapixels- MP
Maximum resolution1920 x 1920 pixels
Video formats supportedH.264, H.265, M-JPEG
Thermal frame rate (NTSC)30 Hz
Supported graphics resolutions1536 x 1536, 1920 x 1920
Ethernet interface typeFast Ethernet
Supported network protocolsIPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, DHCP, NTP, DNS, DDNS, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, TLS
Compatible memory cardsMicroSD (TransFlash), SDHC, SDXC
Maximum memory card size256 GB
Ethernet LAN (RJ-45) ports1
DC output voltage12
Power source typeDC, PoE
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Height59.7 mm
Weight820 g
Diameter159.95 mm
Package weight1500 g

Related product manuals