Honeywell HF680 - Ean;Jan-8

HF680 Series User Guide 95
EAN/JAN-8
<Default All EAN/JAN-8 Settings>
EAN/JAN-8 On/Off
EAN/JAN-8 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8 data. Default
= Off for both 2 Digit and 5 Digit Addenda.
* On
Off
* On
Off
2 Digit Addenda On
* 2 Digit Addenda Off