HF680 Series User Guide 55
Other Programming Selections
• Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan 0 from the Programming Chart. If you are clearing an alternate
format, scan 1, 2, or 3, depending on the format you are clearing. Scan the
Terminal Type and Code I.D. (see Symbology Charts), and the barcode data
length for the specific data format that you want to delete. All other formats
remain unaffected.
• Clear all Data Formats
This clears all data formats.
• Save to exit and save your data format changes.
• Discard to exit without saving any data format changes.
To Next Page
Loading...
