Honeywell HF680 - Depth of Field Performance

HF680 Series User Guide 139
Clear All Data Formats DFMCA3 55
Data Formatter Data Formatter Off DFM_EN0 65
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 65
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 65
Primary/Alternate Data Formats Primary Data Format ALTFNM0 65
Data Format 1 ALTFNM1 66
Data Format 2 ALTFNM2 66
Data Format 3 ALTFNM3 66
Symbologies
All Symbologies All Symbologies Off ALLENA0 68
All Symbologies On ALLENA1 68
Codabar Default All Codabar Settings CBRDFT 69
Off CBRENA0 69
*On CBRENA1 69
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 69
Transmit CBRSSX1 69
Codabar Check Char. *No Check Char. CBRCK20 70
Validate, But Don’t Transmit CBRCK21 70
Validate, and Transmit CBRCK22 70
Codabar Concatenation *Off CBRCCT0 70
On CBRCCT1 70
Require CBRCCT2 70
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 71
Maximum (2 - 60) *60 CBRMAX## 71
Code 39 Default All Code 39 Settings C39DFT 71
Off C39ENA0 71
*On C39ENA1 71
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 72
Transmit C39SSX1 71
Code 39 Check Char. *No Check Char. C39CK20 72
Validate, But Don’t Transmit C39CK21 72
Validate and Transmit C39CK22 72
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 72
Maximum (0 - 48) *48 C39MAX## 72
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page