Honeywell IFP-2100ECS - VCM Maintenance; Voice Settings; Enable Dual Channel System

Model IFP-2100/ECS Installation Manual LS10143-001SK-E
9-31
9.9.1 VCM Maintenance
The VCM Maintenance menu is used to program custom messages into the VCM. Messages can be recorded
locally using the microphone.
1. Select 7 for Panel Programming.
2. Select 8 for Voice Options.
3. Select 1 for VCM Maintenance.
9.9.2 Voice Settings
1. Select 7 for Panel Programming.
2. Select 8 for Voice Options.
3. Select 2 for Voice Settings.
9.9.2.1 Enable Dual Channel System
This option allows you to select whether dual channel is enabled in the system. For dual channel capabilities the
system must only contain dual channel voice hardware.
1. Press the up or down arrow key to select YES or NO for enabling the system as dual channel. Then press
ENTER.