1-90
Rev 4 Aug/2007
KMD 250 Pilot's Guide
Section 1
Basic Operation
DATABASE VERSIONS
The current database version
may be checked by performing
the following steps:
1. Press the MENU Key to dis-
play the AUX MENU Softkey as
in Figure 1-176.
2. Press the AUX MENU
Softkey to display Figure 1-181.
If necessary, use the Joystick to
highlight Database Versions as
shown.
3. Press the SELECT Softkey
to display Figure 1-182.
NOTE: For a VDL installation,
if a new datacard is not
installed before the date shown
under SUBSCRIPTION DATA,,
the KMD 250 will no longer
receive FIS subscriptions even
if the FIS subscriptions are cur-
rent. A new datacard is only
required on initial XM installa-
tions, not for later database
updates.
System Setup
Figure 1-181
Figure 1-182
To Next Page
Loading...
