EasyManua.ls Logo

Honeywell KMD 250 - Intensity

Honeywell KMD 250
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-16
KMD 250 Pilot's Guide
Section 2
FIS Operation
Value Added Service Weather Products
Rev 4 Aug/2007
5. The resolution of NEXRAD XM data is 2 km. Thus, when zoomed in
on the display, each square block is 2 km on a side. The intensity level
reflected by the square will be the highest level sampled within the 2 km
area.
INTENSITY
Precipitation intensity is depicted using colors as follows:
Green Light Level 1 15-30 dBz (10-30 dBz for XM)
Yellow Moderate Level 2 30-40 dBz
Red Heavy Level 3-4 40-50 dBz
Magenta Extreme Level 5-8 50+ dBz
The NEXRAD dBz levels, descriptions and colors are consistent with
FAA guidelines.
Moving the joystick and pressing the LEGEND Softkey will display the
NEXRAD legend as shown in Figure 2-3 (FIS VDL) and 2-4 (XM WX).
The column labeled dBz is a measure of the radar echo intensity.
The strength of a radar return signal typically varies as a function of
distance (i.e., weaker from distant targets, stronger from those nearby)
and the object size.
Many weather sources avail-
able on the internet use color
coding that is different than
the KMD 250 color coding.
The dBz and intensity level
can be used to compare
intensity levels between dif-
ferent sources of NEXRAD
information since many
internet weather providers will
include a legend with dBz
values indicated.
No Data, as shown in the
legend, indicates the lack of
coverage for reasons dis-
cussed previously.
Figure 2-3
Figure 2-4
KMD 250 FIS_R4 8/13/07 10:07 AM Page 2-16

Table of Contents

Related product manuals