EasyManua.ls Logo

Honeywell KMD 250 - Graphical Airmet

Honeywell KMD 250
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-18
KMD 250 Pilot's Guide
Section 2
FIS Operation
Value Added Service Weather Products
Rev 4 Aug/2007
Moving the joystick pointer to
an area that will not highlight a
specific report then pressing
the LEGEND Softkey will dis-
play the graphical METAR
legend as shown in Figure 2-6.
GRAPHICAL AIRMET
The graphical AIRMET is derived from the location description (if pro-
vided) in the textual AIRMET and displayed as a boundary box with the
appropriate color for the condition as shown in the legend (for a
description, see AIRMETs in the Basic Weather Services section). The
IN” box in the legend indicates the current aircraft position is within the
corresponding forecast condition. The boundaries are displayed on a
map background to enhance situational awareness as shown on
Figure 2-7. Low Level Wind Shear and Freezing Level information will
not be displayed on the GRAPHICAL AIRMET; check the textual
AIRMETs for this information.
NOTE: If no location description is provided in the textual AIRMET the
AIRMET cannot be depicted graphically. These AIRMETs are denoted
by displaying the AIRMET identifier in green within the textual AIRMET.
Figure 2-6
Figure 2-7
KMD 250 FIS_R4 8/13/07 10:07 AM Page 2-18

Table of Contents

Related product manuals