1-22
KMD 250 Pilot's Guide
Section 1
Basic Operation
Map Operation
Rev 2 Apr/2004
The baro correction may also
be entered through the AUX
MENU as follows:
1. Press the MENU Key to
display the Menu Softkeys as
in Figure 1-23.
2. Press the AUX MENU
Softkey to display Figure 1-24.
Use the Joystick to select Baro
Entry as shown.
3. Press the SELECT
Softkey and Figure 1-25 will be
displayed.
4. Turn the Rotary Knob to
select the desired entry.
5. Press the OK Softkey.
OBSTACLE LABELS
Obstacles are labeled with two
numbers. The first number is
the height of the obstacle in
FEET ABOVE MSL. The
second number (in brackets) is
the height of the obstacle in
FEET AGL.
Figure 1-24
Figure 1-25
Figure 1-23
To Next Page
Loading...
