1-53
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
DELETING A USER
WAYPOINT
To delete a User Waypoint that
has been previously stored,
perform the following steps:
1. Perform steps 1 and 2 in
Editing A User Waypoint.
2. Press the DELETE WPT
Softkey. Figure 1-94 will now
be displayed.
3. Press the OK Softkey to complete the deletion.
NOTE: Waypoints that are part of a flight plan (denoted by the lock
symbol in the User Waypoint List) cannot be deleted until removed from
the flight plan.
User Waypoints
Figure 1-94
To Next Page
Loading...
