1-42
Rev 2 Apr/2004
KMD 250 Pilot's Guide
Section 1
Basic Operation
The following is a procedure
for entering new User
Waypoints.
1. Press the MENU Key to
display Figure 1-66. Press the
AUX MENU Softkey to display
Figure 1-67. Use the Joystick
or Rotary Knob to place the
cursor over User Waypoints
as seen in Figure 1-67.
2. Press the SELECT
Softkey to display the USER
WAYPOINT LIST display as
shown in Figure 1-68. Initially,
the list will be empty. As way-
points are entered the list will
be populated.
User Waypoints
Figure 1-68
Figure 1-66
Figure 1-67
To Next Page
Loading...
