Honeywell KMD 250 - Page 69

1-50
Rev 2 Apr/2004
KMD 250 Pilot's Guide
Section 1
Basic Operation
9. Two communication fre-
quencies may be entered to
provide QuickTune™ capa-
bility. Use the Joystick to place
the cursor in the desired comm
Type field as shown in Figure
1-88.
10. Turn the Rotary Knob to
select the desired the fre-
quency type as shown in
Figure 1-89. See Table 1-3 for
a list of possible Type entries.
11. In a similar manner as pre-
viously discussed, use the
Joystick and the Rotary Knob
to enter the desired frequen-
cies in the appropriate Freq
fields as seen in Figure 1-90.
12. When all desired entries
are completed, press the
SAVE & EXIT Softkey.
User Waypoints
Figure 1-88
Figure 1-89
Figure 1-90