1-76
Rev 2 Apr/2004
KMD 250 Pilot's Guide
Section 1
Basic Operation
4. Use the Joystick to high-
light the Auto Leg Seq. field
as shown in Figure 1-149.
5. Use the Rotary Knob to
select Enabled. With Auto
Leg Sequencing enabled the
remaining portion of the flight
plan will automatically resume
after passing the waypoint.
6. Press the ACTIVATE
Softkey to start navigating the
OBS Course. The selected
course will be displayed as the
active portion of the flight plan
as seen in Figure 1-150.
Flight Plan Operation
Figure 1-149
Figure 1-150
To Next Page
Loading...
