Honeywell Lyric - Page 14

Lyric Controller Programming Guide
Program Zones (Continued)
Response Type
The system displays the specific options, which are dependent upon the Device Type
that was selected for the zone. Use the down “
˅”
arrow to scroll to the next page of
options. Use the “
˄
” arrow to return to the previous page.
Select “Response Type” from the displayed list, the system returns to the Zone screen.
Select “Save” if programming is complete.
Options:
Not Used
Entry Exit 1
Entry Exit 2
Perimeter
Interior Follower
Trouble
24 Hour Silent
24 Hour Audible
24 Hour Auxiliary
Fire No Verification
Interior With Delay
Monitor
Carbon Monoxide
Garage
Arm Stay
Arm Away
Disarm
No Response
Silent Burglary
Resident Monitor
Resident Response
General Monitor
General Response
Fire With Verification
Day/Night
Garage Monitor
Local Alarm
Select “Save” if programming is complete. The system returns to the Zone
Programming screen.
Alarm Report
Activates reporting option for the device being enrolled.
NOTE:
This field is for Alarms. If Response Type “Trouble” is set up and Alarm Report is
set to “No” the system will still report if Report Troubles was enabled in the
Reporter programming.
Select “Alarm Report” to toggle between “No” or “Yes”. Select “Save” if programming
is complete. The system returns to the Zone Programming screen.
Options:
No
Yes
Chime
Enable or disable chime mode for specific device being enrolled (applies to Entry/
Exit, Perimeter, and Interior Response types only)
Select “Chime” to scroll through the available chime sounds. Select “Save” if
programming is complete. The system returns to the Zone Programming screen.
Options:
Disabled
Standard
Melody
Melody Long
Ascend
Ascend Long
Alert 1
Alert 2
Doorbell 1
Doorbell 2
Evolve
Select “Save” if programming is complete. The system returns to the Zone
Programming screen.
- 14 -