Honeywell Lyric - Smart Scenes Management

Lyric Controller Programming Guide
Program System Settings (Continued)
Programming Field
Function and Action
Programmed
Default
[(A) – (D)] Cross
Zone Delay
Select “Cross Zone Delay”. The System toggles between the
following:
None
30 Seconds
1 Minute
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Note: Cross zoning cannot be used in conjunction with APL.
None
(A) Cross Zone 1
(B) Cross Zone 1
(C) Cross Zone 1
(D) Cross Zone 1
Select the first zone that will be used for Cross Zoning for the
respective Cross Zone List [(A) – (D)]. The system displays the
available zones.
Disabled
(A) Cross Zone 2
(B) Cross Zone 2
(C) Cross Zone 2
(D) Cross Zone 2
Select the second zone that will be used for Cross Zoning for the
respective Cross Zone List [(A) – (D)]. The system displays the
available zones.
Disabled
Program Z-Wave
Programming Field
Function and Action
Programmed
Default
Z-Wave
Enable or Disable Z-Wave operation for use with Z-Wave
thermostats. The system toggles between the available options.
Options:
Enabled
Disabled
Enabled
Temperature Display
Select the correct temperature display. The system toggles
between the available options.
Options:
Fahrenheit
Celsius
Fahrenheit
- 23 -