Honeywell Lyric - Page 22

Lyric Controller Programming Guide
Program System Settings
Restart Exit Time
Disable or enable Restart Exit Time Mode after the system has
been armed and the Exit Delay is counting down. If enabled, the
Exit Delay time can be restarted by selecting the “Restart” icon
and entering the User Code (if quick arming is disabled) or by
selecting the Restart icon (if quick arming is enabled). The system
toggles between the available options.
NOTE:
Automatic Exit Delay Reset, which resets exit delay if the
entry/exit door is re-opened and closed before Exit Delay
time expires after arming, is always enabled regardless of this
setting.
Options:
No
Yes
Yes
Exit Warning
Disable or enable audible Exit Warning. Exit warning sounds
consist of slow continuous beeps until the last 10 seconds, when it
changes to fast beeps. This field is not programmable and is
always enabled.
Yes
Auto Stay Arming
Disable or enable Auto Stay Arming Mode. The system toggles
between the available options. If enabled, when the control panel
has been armed “Armed Away” locally or via RF keypad, the
system will switch to the “Armed Stay” mode if the Exit Time has
expired and no exit has been made.
Options:
No
Yes
Yes
Lack of Usage Notify
Disable or enable Lack of Usage Notification feature. The system
scrolls between the available options. If enabled, notifies the
Central Station if an end user has not operated the security system
for a selected period of time by sending a System Inactivity report
(CID code 654).
Options:
Disabled
1 Day
7 Days
27 Days
90 Days
180 Days
365 Days
Disabled
Power-Up in Previous
Disable or enable Power-Up in Previous Mode feature. The system
toggles between the available options. When the system powers
up armed, an alarm will occur 1 minute after arming if a zone is
faulted. Any bypassed zones will remain bypassed.
This field is always “Enabled” and is not selectable.
Yes
Display Alarm Cancel
Disable or enable display of Cancelled Alarm. The system toggles
between the available options.
Options:
No
Yes
Yes
Display Exit Time
Disable or enable display of Exit Time. The system toggles
between the available options.
Options:
No
Yes
Yes
- 22 -