Honeywell MagneW 3000 Plus - Page 66

36-KI-16-32
Page 2 of 3
Availability
MGG18F
TABLE I (Continued) Selection
Flange JIS 10K (diameter 80mm or larger) SUS304 _ _ _ _ J14 _ _ _ _ _ _ e
Flange JIS 20K (diameter 80mm or larger SUS304 _ _ _ _ J24 _ _ _ _ _ _ e
Flange JIS 30K (diameter 80mm-200mm) SUS304 _ _ _ _ J34 _ _ _ _ _ _ m
Flange ANSI 150 (diameter 80mm or larger) SUS304 _ _ _ _ A14 _ _ _ _ _ _ e
Flange ANSI 300 (diameter 80mm-450mm only) SUS304 _ _ _ _ A24 _ _ _ _ _ _ n
Flange JIS G3451 F12 (diameter 80mm or larger) SUS304 _ _ _ _ G14 _ _ _ _ _ _ e
Flange DIN PN10 (diameter 80mm or larger) SUS304 _ _ _ _ D14 _ _ _ _ _ _ e
Flange DIN PN16 (diameter 80mm or larger) SUS304 _ _ _ _ D24 _ _ _ _ _ _ e
Flange DIN PN25 (diameter 80mm or larger) SUS304 _ _ _ _ D34 _ _ _ _ _ _ e
Flange DIN PN40 (diameter 80mm-200mm) SUS304 _ _ _ _ D44 _ _ _ _ _ _ m
Flange JPI150 (diameter 80mm-200mm) SUS304 _ _ _ _ P14 _ _ _ _ _ _ m
Flange JPI300 (diameter 80mm-200mm) SUS304
_ _ _ _ P24 _ _ _ _ _ _
m
D - Electrodes
*
SUS316L _ _ _ _ _ _ _ L _ _ _ _ _
Hastelloy C
(with Teflon PFA only) _ _ _ _ _ _ _ C _ _ _ _ _ c
Titanium _ _ _ _ _ _ _ K _ _ _ _ _
Zirconium
(with Teflon PFA only) _ _ _ _ _ _ _ H _ _ _ _ _ c
Tantalum (with Teflon PFA only) _ _ _ _ _ _ _ T _ _ _ _ _ c
Tungsten Carbide _ _ _ _ _ _ _ W _ _ _ _ _
Platinum-Iridium
(with Teflon PFA only) _ _ _ _ _ _ _ P _ _ _ _ _ c
Alloy 20 (with Teflon PFA only) _ _ _ _ _ _ _ A _ _ _ _ _ c
Hastelloy B (with Teflon PFA only) _ _ _ _ _ _ _ B _ _ _ _ _ c
SUS304 (with Teflon PFA only) _ _ _ _ _ _ _ E _ _ _ _ _ c
Monel (with Teflon PFA only) _ _ _ _ _ _ _ M _ _ _ _ _ c
Nickel (with Teflon PFA 15-200mm only) _ _ _ _ _ _ _ N _ _ _ _ _ g
SUS316L Protruded Tip (with Teflon PFA 15-200mm only) _ _ _ _ _ _ _ 1 _ _ _ _ _ g
SUS316L for Alumina with Flat Tip (with Teflon PFA 15-200mm only) _ _ _ _ _ _ _ 2 _ _ _ _ _ g
SUS316L for Alumina with Pointed Tip (with Teflon PFA 15-200mm only)
_ _ _ _ _ _ _ 3 _ _ _ _ _
g
E - Grounding Rings
SUS316 _ _ _ _ _ _ _ _ S _ _ _ _
*
SS Top Hat Style (Upstream Onlyy) _ _ _ _ _ _ _ _ G _ _ _ _ c
Hastelloy C (with Teflon PFA only) _ _ _ _ _ _ _ _ C _ _ _ _ c
Titanium _ _ _ _ _ _ _ _ K _ _ _ _
Zirconium
(with Teflon PFA 15-200mm only) _ _ _ _ _ _ _ _ H _ _ _ _ g
Tantalum (with Teflon PFA 15-200mm only) _ _ _ _ _ _ _ _ T _ _ _ _ g
Platinum (with Teflon PFA 15-200mm only) _ _ _ _ _ _ _ _ P _ _ _ _ g
Alloy 20 (with Teflon PFA only) _ _ _ _ _ _ _ _ A _ _ _ _ c
Hastelloy B (with Teflon PFA only) _ _ _ _ _ _ _ _ B _ _ _ _ c
SUS304 (with Teflon PFA only) _ _ _ _ _ _ _ _ E _ _ _ _ c
SUS316L (with Teflon PFA only) _ _ _ _ _ _ _ _ L _ _ _ _ c
Nickel (with Teflon PFA only)
_ _ _ _ _ _ _ _ N _ _ _ _
c
F - Wiring Connection/Water Tight Gland
G1/2 Internal Thread without Water Tight Gland _ _ _ _ _ _ _ _ _ 2 _ _ _
(Not CSA/FM approved)
G1/2 Internal Thread with Brass (Ni-plated) Water Tight Gland _ _ _ _ _ _ _ _ _ 3 _ _ _
(Not CSA/FM approved)
G1/2 Internal Thread with Plastic Water Tight Gland _ _ _ _ _ _ _ _ _ 4 _ _ _
(Not CSA/FM approved)
1/2 NPT Internal Thread without Water Tight Gland _ _ _ _ _ _ _ _ _ 5 _ _ _
*
(CSA/FM NI approval)
CM20 Internal Thread without Water Tight Gland _ _ _ _ _ _ _ _ _ 6 _ _ _
(Not CSA/FM approved)
Pg13.5 Internal Thread without Water Tight Gland _ _ _ _ _ _ _ _ _ 7 _ _ _
(Not CSA/FM approved)
G1/2 Internal Thread with SUS304 Water Tight Gland _ _ _ _ _ _ _ _ _ 8 _ _ _
(Not CSA/FM approved)