Honeywell MagneW 3000 Plus - Page 67

36-KI-16-32
Page 3 of 3
Availability
MGG18F
Selection
G - Face to Face Dimension
Standard _ _ _ _ _ _ _ _ _ _ A _ _
*
Competitive (refer to Table 103 and consult factory)
_ _ _ _ _ _ _ _ _ _ 9 _ _
c
H - Installation/Wiring Direction - Remote Only
Upstream Side (horizontal/vertical piping mounting) _ _ _ _ _ _ _ _ _ _ _ A _
*
Downstream Side (horizontal/vertical piping mounting) _ _ _ _ _ _ _ _ _ _ _ B _
Horizontal Piping Mounting/Left Side Viewed from Upstream _ _ _ _ _ _ _ _ _ _ _ C _
Horizontal Piping Mounting/Right Side Viewed from Upstream
_ _ _ _ _ _ _ _ _ _ _ D _
I - Calibration
Standard Calibration - 2 Point (0, 100%) w/ Master Converter _ _ _ _ _ _ _ _ _ _ _ _ R
*
3 Point (0, 50, 100%) with Master Converter _ _ _ _ _ _ _ _ _ _ _ _ P
5 Point (0, 25, 50, 75, 100%) with Master Converter _ _ _ _ _ _ _ _ _ _ _ _ Q
2 Point (0, 100%) with Customer’s Specific Converter _ _ _ _ _ _ _ _ _ _ _ _ J
3 Point (0, 50, 100%) with Customer’s Specific Converter _ _ _ _ _ _ _ _ _ _ _ _ A
5 Point (0, 25, 50, 75, 100%) with Customer’s Specific Converter
_ _ _ _ _ _ _ _ _ _ _ _ E
TABLE II
A - Finish
Standard X
*
Corrosion-resistant Finish 1
Corrosion-proof Finish
2
TABLE III
Version
Standard S
*
TABLE IV
Options
Calibration Certificate (additional copy) A
Traceability Certificate B
Mill Sheet (only for electrodes and grounding rings) C
Gasket for Plastic Piping J
Attachment of Tagplate to Detector Terminal Box (Note 1) K
Attachment of Tagplate to Neck of Detector (Note 1) L
Specific Color Finish (Note 2) P
Note 1: Must be selected if Tag number is required.
Note 2: Order must specify Munsell color number.
RESTRICTIONS
Restrictions Letter Available Only With
Not Available With
c d e f g h j m n Table Selection Table Selection
IB _ _ _ P
IA 025 to 200
IB
_ _ _ P
IA 025 to 65mm
IA 250 to 600mm
IB
_ _ _ P
IA 250 to 600mm
IA 025 to 65mm
IA 500, 600mm
IA 080 to 200mm
1B
_ _ _ P
1A 080 to 450mm
IB
_ _ _ P