36-KI-16-33
Issue 3
Page 1 of 4
MagneW 3000
PLUS
Submersible Detector
Model Selection Guide
Remote Detector, ’Wafer Type,
Size 15-200mm (with Integral Cable)
ns
ruc
ons
Select the desired key number. The arrow to the right marks the selection available.
Make one selection from Tables I thru III, using the column below the proper arrow.
Select as many Table IV options as desired. (If no selections are desired, specify 00.)
A dot ( ) denotes unrestricted availability. A letter denotes restricted availability.
Restrictions follow Table IV.
A complete Model Number must have the designated number of digits in each table.
Key Numbe
I II III IV V
_ _ _ _ _ _ - _ _ _ _ _ _ _ _ _ _ _ _ - _
- _ - _ ,
- _ _ _ _ _
VI VII
- _ - _ _ _ _
KEY NUMBER Selection Availability
Description
MagneW 3000
PLUS
Submersible Detector,Wafer Type, Sizes 15-200m
MGG19D
TABLE I
A - Diameter Flow Range Minimum Flow Range Maximum
Millimeter Inches
In US GPM In Litres In US GPM In Litres
15 0.5 0.280 1.06 28.002
25 1.0 0.779 2.95 77.931
40 1.5 1.990 7.53 199.011
50 2.0 3.113 11.78 311.285 1178.34
65 2.5 5.239 19.83 523.945 1983.34
80 3.0 7.969 30.17 796.924 3016.68
100 4.0 12.46 47.17 1246.02 4716.68
125 5.0 19.46 73.67 1946.08 7366.69
150 6.0 28.00 106.00 2800.24 10600.04
200 8.0 49.80 188.50 4979.68 18850.07
200 _ _ _ _ _ _ _ _ _
B - Liner
PFA
Polyurethane Rubber (25 to 200mm only)
_ _ _ Q _ _ _ _ _ _ _ _
d
C - Pipe Connection
Wafer JIS10K
Wafer JIS20K
Wafer JIS30K
Wafer ANSI150
Wafer ANSI300
Wafer JIS G3451 F12 (diameter 80mm or larger)
h
Wafer DIN PN10
Wafer DIN PN16
Wafer DIN PN25
Wafer DIN PN40
Wafer JPI150
Wafer JPI300
_ _ _ _ 62 _ _ _ _ _ _
Table I continued on next page.