EasyManua.ls Logo

Honeywell NOTIFIER BACNET-GW-3

Honeywell NOTIFIER BACNET-GW-3
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product Overview Agency Listings
10 BACNET-GW-3 Installation and Operation Manual – P/N LS10014-000NF-E:C6 5/5/2017
1.8 Agency Listings
1.8.1 Standards
1.8.2 Agency Restrictions and Limitations
BACNET-GW-3 is UL 864 listed for supplementary use only.
BACNET-GW-3 is UL 2572 listed for supplementary use only and cannot be used to trigger mass
notification announcements.
The web portal feature is listed for supplementary use only.
Compliance - This product has been investigated to, and found to be in compliance with, the
following standards:
National Fire Protection Association
NFPA 72 National Fire Alarm and Signaling Code
Underwriters Laboratories
UL 864 Control Units for Fire Alarm Systems, Ninth Edition
UL 2017 General Purpose Signaling Devices and Systems, First Edition
UL 2572 Mass Notification Systems, First Edition
Underwriters Laboratories Canada
CAN/ULC S527-11 Standard for Control Units for Fire Alarm Systems, Third Edition
CAN/ULC S559-13 Standard for Equipment for Fire Signal Receiving Centres and Systems,
Second Edition
Installation - This product is intended to be installed in accordance with the following:
Local
AHJ Authority Having Jurisdiction
National Fire Protection Association
NFPA 70 National Electrical Code
NFPA 72 National Fire Alarm and Signaling Code
NFPA 101 Life Safety Code
Underwriters Laboratories Canada
CAN/ULC S524 Installation of Fire Alarm Systems
CAN/ULC S561 Installation and Services for Fire Signal Receiving Centres and Systems
Canada
CSA C22.1 Canadian Electrical Code, Part I, Safety Standard for Electrical Installations

Table of Contents

Related product manuals