41BACNET-GW-3 Installation and Operation Manual – P/N LS10014-000NF-E:C6 5/5/2017
Manufacturer Warranties and Limitation of Liability
Manufacturer Warranties. Subject to the limitations set forth
herein, Manufacturer warrants that the Products manufactured by it
in its Northford, Connecticut facility and sold by it to its authorized
Distributors shall be free, under normal use and service, from
defects in material and workmanship for a period of thirty six
months (36) months from the date of manufacture (effective Jan. 1,
2009). The Products manufactured and sold by Manufacturer are
date stamped at the time of production. Manufacturer does not
warrant Products that are not manufactured by it in its Northford,
Connecticut facility but assigns to its Distributor, to the extent
possible, any warranty offered by the manufacturer of such
product. This warranty shall be void if a Product is altered,
serviced or repaired by anyone other than Manufacturer or its
authorized Distributors. This warranty shall also be void if there is
a failure to maintain the Products and the systems in which they
operate in proper working conditions.
MANUFACTURER MAKES NO FURTHER WARRANTIES, AND
DISCLAIMS ANY AND ALL OTHER WARRANTIES, EITHER
EXPRESSED OR IMPLIED, WITH RESPECT TO THE
PRODUCTS, TRADEMARKS, PROGRAMS AND SERVICES
RENDERED BY MANUFACTURER INCLUDING WITHOUT
LIMITATION, INFRINGEMENT, TITLE, MERCHANTABILITY, OR
FITNESS FOR ANY PARTICULAR PURPOSE.
MANUFACTURER SHALL NOT BE LIABLE FOR ANY
PERSONAL INJURY OR DEATH WHICH MAY ARISE IN THE
COURSE OF, OR AS A RESULT OF, PERSONAL, COMMERCIAL
OR INDUSTRIAL USES OF ITS PRODUCTS.
This document constitutes the only warranty made by
Manufacturer with respect to its products and replaces all previous
warranties and is the only warranty made by Manufacturer. No
increase or alteration, written or verbal, of the obligation of this
warranty is authorized. Manufacturer does not represent that its
products will prevent any loss by fire or otherwise.
Warranty Claims. Manufacturer shall replace or repair, at
Manufacturer's discretion, each part returned by its authorized
Distributor and acknowledged by Manufacturer to be defective,
provided that such part shall have been returned to Manufacturer
with all charges prepaid and the authorized Distributor has
completed Manufacturer's Return Material Authorization form. The
replacement part shall come from Manufacturer's stock and may
be new or refurbished. THE FOREGOING IS DISTRIBUTOR'S
SOLE AND EXCLUSIVE REMEDY IN THE EVENT OF A
WARRANTY CLAIM.
Warn-HL-08-2009.fm
To Next Page
Loading...
Need help?
General