997-291, Version 3.05
November 2010
ID3000/ID2000 Fire Panel Configuration Tool Manual
Panel Settings
2 - 13
3 Required for Master/Slave network only,
and dependent on panel mode:
a. Standard. Check this box if there is a
Remote Fire Output on another panel on
the network but not on this panel. This
allows Day/Night modes to be configured
for this panel, and ensures the Day Mode
and Fire O/P Disable pushbuttons work
correctly on the panel.
b. VdS. If no ÜE is configured on this panel,
check this box (for same reasons as
described for ‘Standard’ above).
3
To Next Page
Loading...
