997-291, Version 3.05
November 2010
ID3000/ID2000 Fire Panel Configuration Tool Manual
Panel Settings
2 - 23
2.11 Extinguishing System Tab
Edit as follows:
1 Set the number of seconds before the
release is activated at which the PAUSE
occurs in the ULI and IRI HOLD modes
(see Section 4.1.4.4).
2 Set the flood duration time. This time is
used if ‘Soak Timer’ is selected on an Alarm
Control Matrix entry.
CAUTION:
This product is not compliant
with EN 12094-1.
EN
12094-1
!
Fire extinguishing installations in
Europe are required to be certified as
compliant to this standard.
1
2
To Next Page
Loading...
