98 PM45 and PM45c User Guide
Note: To view the Accessory User Guide, visit the PM45 product page at
www.sps.honeywell.com.
Cutter Module Both Use the cutter module to cut media
into individual labels.
Cutter Tray Both Use the cutter tray with the cutter
module to collect the cut-off labels.
3-Inch Media Core Both Use this module to hold the 3-inch
media core media.
Collapsible Core Both Use the collapsible core to easily
remove ribbon from the take up hub.
Rotation Hanger Both Use the rotation hanger to enable
consistent feeding of media stock.
Boarding Pass
Guides
Both Use this accessory to guide the
boarding pass into the TPH.
Ticket Shelf Both Use this accessory to hold the fan-fold
ticket.
Extended Ticket Tray PM45c Use this accessory to hold the printed
boarding pass in position and allow
easy tear off at perforation.
Extended Base PM45 Use the extended base option to
rewind full roll of labels.
Large Media Arm
Edge Guide
PM45 Use the large edge guide to make sure
that large rolls of media stay on the
hanger.
Short Door PM45c Use the short door to accommodate
large rolls of media.
Dome Door PM45c Use the dome door when printing with
large media size and to protect the
inside of the printer from dust and
debris.
Option/Accessory
PM45/
PM45c/
Both
Description
To Next Page
Loading...
