88 PM45 and PM45c User Guide
Warning
To view these settings:
• From the printer Main Menu, select Settings > Alerts > Warning.
• From the printer web page, click Configure > Alerts > Warning.
Information
To view these settings:
• From the printer Main Menu, select Settings > Alerts > Information.
• From the printer web page, click Configure > Alerts > Information.
Warning Alerts
Default Values
Status
Delay Repeat Delay Unit Message
Ribbon Installed Disable 1 Occurrences Warning-Ribbon installed
Media Low Enable 1 Occurrences Warning-Media low
Ribbon Low Enable 1 Occurrences Warning-Ribbon low
Upgrading Firmware Disable 1 Occurrences Warning-Upgrading
firmware
Odometer (User
Resettable)
Disable 1 Occurrences Warning-Odometer (User
Resettable) has reached a
preset value.
Odometer
(Printhead)
Disable 1 Occurrences Warning-Odometer
(Printhead) has reached a
preset value.
Odometer (Printer) Disable 1 Occurrences Warning-Odometer
(Printer) has reached a
preset value.
Replace Printhead Disable 1 Occurrences Warning-Replace printhead
Clean Printhead Disable 1 Occurrences Warning-Clean printhead
Faulty Dot Disable 1 Occurrences Warning-Faulty dot is
detected
Memory Low Disable 1 Occurrences Warning-memory low
Flash Memory Low Disable 1 Occurrences Warning-Flash Memory low
Warning Alerts
Default Values
Status
Delay Repeat Delay Unit Message
Print Job Complete Disable 1 Occurrences Print Job Complete
Started Disable 1 Occurrences Printer is started
Printer is Rebooting Disable 1 Occurrences Printer is Rebooting
To Next Page
Loading...
