PM45 and PM45c User Guide 19
Load Media from an External Supply
You can place the media supply, such as fanfold tickets or tags, behind the printer
or underneath it.
1. Open the media cover.
2. Turn the printhead lift lever counterclockwise to raise the printhead.
3. Feed media through the slot in the back of the printer (or from the slot in the
bottom of the printer) and route it through the print mechanism.
4. Turn the printhead lift lever clockwise to close the printhead. The printer
performs the action defined by the Head Down Action setting (Smart
calibration).
To Next Page
Loading...
