10 PM45 and PM45c User Guide
Calibration Wizard
Printer Command Languages and Simulator Support
Options
A printer command language is a set of instructions that controls printer functions:
• Configure the printer.
• Return the status of the printer.
• Control peripheral devices.
• Format a label or receipt for printing.
The printer supports these command languages and language simulator support
options:
•
Direct Protocol
• Fingerprint
• IPL
• ZSim
• DPL
• Smart Printing (C#)
• Direct PDF Printing
Direct Protocol
Direct Protocol (DP) uses a more intuitive English-like syntax. Direct Protocol lets
you combine predefined layouts and variable data to create labels, tickets, and
tags. If you are using barcode software, select Direct Protocol as your printer
command language.
Wizard Description
Media Calibrates all media sensors and shows current print settings.
Label Taken Sensor Calibrates the label taken sensor used with the label dispenser. Available
when the label taken sensor is installed.
RFID Calibrates the optimal label adjustment and output power setting for the
RFID media loaded in the printer. Available when the RFID module is
installed.
Date and Time Configures the date and time.
Screen Calibrates the touch screen.
To Next Page
Loading...
