EasyManua.ls Logo

Honeywell PRIMUS 1000 - Heading Failures and Flags; MADC Failures; Plan Mode Failure and Warning Displays

Honeywell PRIMUS 1000
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRIMUSr 1000 Integrated Avionics System
A28--1146--112--00
4-79
Electronic Flight Instrument System (EFIS)
A bearing and distance display of the designators position relative
to its anchor waypoint is also displayed.
PLAN MODE FAILURE AND WARNING DISPLAYS
Plan mode caution and warning annunciations are shown in figure
4--46. Refer to the figure to find the location of failure and warning
annunciations described below.
AD--50943--R3@
N
Plan Mode Caution and Warning Displays
Figure 4--46
D MADC Failures -- When the MADC fails, the SAT, TAS, and TAT
numerical values are replaced with amber dashes.
D Heading Failures and Flags -- Failure of the displayed heading is
shown by removing the active flight plan and wind display, and
placing a red HDG FAIL at the top center of the plan range ring.
NOTE: When EFIS TEST is selected,HDG FAIL is replacedwith
HDG TEST.
D WX (Weather Radar) Failure -- Weather radar failures are
annunciatedwithanamberFAILinthemiddleleftsideofthedisplay.
D FMS Failure -- When the FMS fails, the active flight plan, navaids,
and airports are removed from the display. This indication is also
given in the event of an invalid heading display.

Table of Contents

Related product manuals