EasyManua.ls Logo

Honeywell PRIMUS 1000 - Checklist Menu; M;P RNG Knob

Honeywell PRIMUS 1000
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRIMUSr 1000 Integrated Avionics System
A28--1146--112--00
4-15
Electronic Flight Instrument System (EFIS)
D M/PRNGKnob--Thepilotusesthemap/planrangeknobtochange
the range scale when in the map or plan display mode.
CHECKLIST MENU
Pushing the CKLST button on the main menu (shown in figure 4--8),
displays the checklist menu on the MFD, as shown in figure 4--13.
NOTES: 1. The checklist can be selected for display on either
MFD.However,ifitisdisplayedon one,themenuitem
CKLSTisremoved fromtheotherMFDand,therefore,
cannot be selected on that MFD.
2. When the checklist display is selected for the firsttime
(after power--up) the checklist disclaimer page is
shown. Push PAG to go to the master index of
procedures.
3. Normal procedures, emergency procedures,
abnormal procedures and waypoint listing indices (as
available) are selectable with the SKP (skip) button
from the checklist menu first displayed. Once the
proceduresindexisselected,thechecklist displaylists
all the procedures in that index.
4. To switch from one procedures index to another (for
example, to go from NORMAL to EMERGENCY)
selectthechecklist menufirstdisplayed,andmakethe
proper selection.
AD--50905@
Checklist Menu
Figure 4--13

Table of Contents

Related product manuals