EasyManua.ls Logo

Honeywell PRIMUS 1000 - NAV Source Distance; Navigation Symbol Colors; Wind Vector

Honeywell PRIMUS 1000
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRIMUSr 1000 Integrated Avionics System
A28--1146--112--00
Electronic Flight Instrument System (EFIS)
4-40
D Navigation Symbol Colors -- The color of the course pointer,
distance display, groundspeed, lateral deviation, and navigation
source annunciation is listed in table 4--11.
On--Side Navigation
Source Selected
Color
Short range navigation Green
FMS Magenta
Same navigation source on both sides
or secondary NAV source
Yellow
Navigation Symbol Colors
Table 4--11
D NAV Course Deviation Indicator (CDI) With TO/FROM Indication
-- The center of the HSI contains an aircraft symbol. The lateral
deviation scale is displayed in the form of two dots on either side of
theaircraftsymbol.ThisrepresentsNAVdeviationfromtheselected
source. The lateral deviation dots rotate around the center of the
course pointer.
NOTE: If theoptionalFMSisinstalledandselected,andtheFMS
is operating in the approach mode, full scale deflection is
0.3 nautical miles (NM).
The TO/FROMindicatoris displayed as a white arrow in front of the
aircraft (TO) or behind the aircraft (FROM). A TO indication is
displayedaslongastheselectedcoursepointeriswithin±90_ofthe
selected NAV source bearing.
D Wind Vector (Available if FMS is Installed) -- Wind vector
information is displayed to the left of the HSI. The wind is shown in
magenta with velocity and direction. Wind information is displayed
as a vector arrow showing the direction of the wind relative to the
airplane symbol. The digital quantity indicates wind velocity.
D NAV Source Distance -- The NAV source distance is displayed on
the left side of the HSI. The distance represents distance to the
station for a short range NAV and the distance to the TO waypoint
for the FMS. If DME hold is selected whenthe VOR is displayed,an
amber H is displayed next to the DME distance.

Table of Contents

Related product manuals