Honeywell PRIMUS 1000 - Sect (Sector) Switch; Slv (Slaved) Annunciator; Target Alert Characteristics; Tilt Knob

PRIMUSr 1000 Integrated Avionics System
A28--1146--112--00
PRIMUS
â
660 Weather Radar System
B--4
Selected Range
(NM)
Target Depth
(NM)
Target Range
(NM)
5 2 5--155
10 2 10--160
25 4 25--150
50 4 50--150
100 6 100--175
200 6 200--250
300 6 300--350
FP (Flight Plan) 2 5--155
Target Alert Characteristics
Table B--1
5 SECT (SECTOR) SWITCH
The SECT switch is a toggle switch that selects either the normal 14
looks/minute 120° scan, or the faster update 20 looks/minute 60° sector
scan.
6 TILT KNOB
The rotary TILT knob is used to set the tilt angle of the antenna beam
with relation to the aircrafts longitudinal axis. Clockwise (cw) rotation
tiltsthe beam upward to +15_; counterclockwise (ccw)rotation tiltsthe
beam downward to --15_.
A digital readout of the antenna tilt angle is displayed on the MFD.
WARNING
TOAVOID FLYINGUNDER OROVERSTORMS,FREQUENTLYSE-
LECT MANUAL TILT TO SCAN BOTH ABOVE AND BELOW THE
AIRCRAFT’S FLIGHT LEVEL. ALWAYS USE MANUAL TILT FOR
WEATHER ANALYSIS.
7 SLV (SLAVED) ANNUNCIATOR
The SLV dead--front annunciator is only used in dual controller
installations. With dual controllers, one controller can be slaved to the
other by selecting OFF with the radar MODE switch. This slaved
condition is shown with the SLV annunciator.