Honeywell ScanPal 5100 User Manual

8 - 2
OR
Wait until all Bluetooth devices in range have been scanned and the Scan Dialog window appears.
6. Scroll through the list until your Bluetooth printer device is found. You may select any device in the
list to display its MAC address.
7. Highlight the Bluetooth printer device and select the Select button.
8. When the COM port selection appears, select COM7 and select OK.
9. If successful, the COM port and MAC address of the device appears under the list of Registered
Bluetooth Virtual COM ports.
10. Select OK to exit the Bluetooth Handler.
11. One of the ways to test the connection to the printer is to follow the steps below:
a. Select Start -> Programs -> Demos -> Print Demo.
b. Select Zebra (BT) Barcodes Print.
c. If the connection is successful, the bar code prints.

Honeywell ScanPal 5100 Specifications

General

Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Display number of colors	-
Flash memory	0.128 GB
Internal memory	0.064 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	PXA 300
Processor frequency	0.624 GHz
GPS (satellite)	No
Operating system installed	Windows CE 5.0
Wi-Fi standards	802.11b, 802.11g
Bluetooth version	2.0+EDR
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	3300 mAh
Battery life (max)	8 h
Product color	Black, Grey
International Protection (IP) code	IP54
Keypad number of keys	28

Weight and Dimensions

Depth	57 mm
Width	157 mm
Height	41 mm
Weight	231 g