Honeywell Solaris 7980g

Solaris 7980g User Guide 107
Code 11 Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 92) for additional information. Minimum and Maximum lengths
= 1-80. Minimum Default = 4, Maximum Default = 80.
Code 128
<Default All Code 128 Settings>
Code 128 On/Off
If you are reading Code 128 bar codes, Codablock F should remain disabled. If you
are enabling Codablock F (see Codablock F on page 132), you should disable Code
128.
* Two Check Digits
Minimum Message Length
Maximum Message Length
* On
Off